bxm's IT Story
Open_Source_NET_ NAT 본문
공통]
ena
conf t
no ip domain lookup
line c 0
logg sy
exec-timeout 0
exit
line vty 0 4
pass cisco
exit
hostname ##
end
1. ASW1와 ASW2에 각각 VLAN 10,20 // VLAN 30,40을 설정하고 각 스위치별로 단말에 연결된 PC와 Access
2. Ether channel로 ASW1와 연결된 PO2(->DSW1), PO3(->DSW2)
ASW2 PO4(->DSW1), PO5(->DSW2)
DSW1 <-> DSW2 (PO1) 을 연결.
3. DSW1에서 int vlan 10~int vlan 40 까지 들어가 IP 할당.
DSW2 "
## Ether channel 로 결합시키기 ##
ASW1]
conf t
no ip routing
vlan 10
exit
vlan 20
exit
int f1/1
sw mo ac
sw ac vlan 10
exit
int f1/2
sw mo ac
sw ac vlan 20
exit
int range f1/14 - 15
sw tr enc dot
sw mo tr
channel-group 2 mo on
int range f1/12 - 13
sw tr enc dot
sw mo tr
channel-group 3 mo on
## PO2와 PO3 연결 확인하였음.
ASW2]
conf t
no ip routing
vlan 30
exit
vlan 40
exit
int f1/3
sw mo ac
sw ac vlan 30
exit
int f1/4
sw mo ac
sw ac vlan 40
exit
int range f1/12 - 13
sw tr enc dot
sw mo tr
channel-group 4 mo on
int range f1/14 - 15
sw tr enc dot
sw mo tr
channel-group 5 mo on
## PO4와 PO5 연결 확인하였음.
DSW1, DSW2]
conf t
ip routing
int range f1/10 - 11
sw tr enc dot
sw mo tr
channel-group 1 mo on
end
## 각 VLAN에 IP 넣어주기 ##
DSW1]
conf t
int vlan 10
ip add 192.168.10.29 255.255.255.252
int vlan 20
ip add 192.168.10.61 255.255.255.252
int vlan 30
ip add 192.168.10.93 255.255.255.252
int vlan 40
ip add 192.168.10.125 255.255.255.252
DSW2]
conf t
int vlan 10
ip add 192.168.10.30 255.255.255.252
int vlan 20
ip add 192.168.10.62 255.255.255.252
int vlan 30
ip add 192.168.10.94 255.255.255.252
int vlan 40
ip add 192.168.10.126 255.255.255.252
## 게이트웨이 이중화 ##
DSW1[Active-10,20/Stanby-30,40] , DSW2[Active-30,40/Stanby-10,20]
DSW1]
conf t
int vlan 10
standby 10 ip 192.168.10.29
standby 10 priority 110
standby 10 preempt delay minimum 5
int vlan 20
standby 20 ip 192.168.10.61
standby 20 priority 110
standby 20 preempt delay minimum 5
int vlan 30
standby 30 ip 192.168.10.93
standby 30 preempt
int vlan 40
standby 40 ip 192.168.10.125
standby 40 preempt
DSW2]
conf t
int vlan 30
standby 30 ip 192.168.10.29
standby 30 priority 110
standby 30 preempt delay minimum 5
int vlan 40
standby 40 ip 192.168.10.61
standby 40 priority 110
standby 40 preempt delay minimum 5
int vlan 20
standby 10 ip 192.168.10.93
standby 10 preempt
int vlan 20
standby 20 ip 192.168.10.125
standby 20 preempt
ASW1]
conf t
vlan 10
exit
vlan 20
exit
int f1/1
sw mo ac
sw ac vlan 10
exit
int f1/2
sw mo ac
sw ac vlan 20
exit
int range f1/14 - 15
sw tr enc dot
sw mo tr
channel-group 2 mo on
int range f1/12 - 13
sw tr enc dot
sw mo tr
channel-group 3 mo on
'Network > Cisco (KEDU)' 카테고리의 다른 글
| Full-mesh에서의 Frame-relay (0) | 2021.07.01 |
|---|---|
| Ether Channel을 통한 Total MAP 구성 (0) | 2021.06.30 |
| VTP (Vlan Trunking Protocol) // DTP (Dynamic Trunking Protocol) (0) | 2021.06.30 |
| DHCP Relay Agent (DHCP의 끝판왕) (0) | 2021.06.28 |
| Ether Channel (0) | 2021.06.28 |
